Evoluzion Photoluminescent





                   Ink Photoluminescent Luminescent         Ink Photoluminescent Luminescent


It is a luminescent ink curing by photopolymerization with ultraviolet lamps emitting radiation, uniform and shiny smooth finish. Lamps cured by U.V. from 80 to 120 w / cm. with approximate speed of 15 to 25 meters minimum.
The printing ink luminescent light accumulates in a short space of time and subsequently emitted in darkness for a long period of time. It can be activated an unlimited number of times.
PRODUCTS NOT contain radioactive elements, phosphorus or lead.


-  Color yellow, red, orange or blue (see other colors).
-  A dispersion of synthetic resins.
-  They have been made for maximum traction and durability on most thermoplastics.
-  Quantity of matter fixed at 75%.
-  Point of inflation: 25 (TAG)
-  Thixotropic.

-  Before application, it is advised to perform a preliminary test.
-  Should always be applied on a surface as white as possible to obtain the maximum luminescence.
-  Performance will depend on how you want to achieve luminescence.
-  The tack occurs at 20 - 30 mins. (T = 20; RH = 65%). To apply subsequent layers, allow for 3-4 hours (minimum per layer) as temperature and relative humidity. It can be dried at about 70 ° C.
-  This ink can be applied on surfaces of rigid PVC, flexible PVC, cardboard, paper, ceramics, iron, aluminum, glass, etc ...
-  Must be applied mesh of about 34 wires.
-  Ready to use.

-  Storing at temperatures below 40 °C.
-  Close the container after use.
-  Keep containers out of reach of children.
-  Do not ingest.
-  Flammable product. Follow all the instructions to this effect.
-  Use with adequate ventilation.